40 Ton Ironworker

Specifications:

PUNCH 
Max. Capacity              1″ dia. in 1/2″ plate
Work Height                41-1/2″
FLAT BAR SHEAR 
Max. Thick.                   3/8″ x 10″
Work Height                33-1/2″
ANGLE SHEAR
Max. Size                       3″ x 3″ x 1/4″
Work Height                52-1/2″
GENERAL SPECS
Rated Capacity                  40 ton
Throat Depth                      7″
Open Height                       8″
Shut Height                        7″
Stroke                                   1-3/8″
Cycle Time                          2 seconds
Electric Motor Standard   5 HP, 3 Phase, 208/240 v,1725 rpm, 14 amp
Electric Motor Options      5 HP, 3 Phase, 440/480 v or 208/240 v
1 Phase, 208/240 v, 1725 rpm, 26 amp
Hydraulic Pump Size         3-1/2 gpm – single stage
Valve Pressure                     3000 psi max.
Reservoir                               7 gallons
Cylinder                                 8-1/2″ – 2-1/2″ ram

Optional        40 Ton (A) equipped with an extra manifold, 3-way switch,
and quick disconnect ports to easily accept our optional Hydraulic Tube
Bender

Optional Equipment:
Coper/ Notcher
Punch & Die Starter Box, 8 sets (3/16” to 1 1/16”)
Quick Change Punch Coupling
10” Brake w/ 4 way die
8” Brake w/ 4 way die
Back Gauge for shearing plate and angle, up to 48”
Gauging Table Kit, 3/8” x 12” x 18” w/ fences
Heavy Duty Gauging Table Kit, 1” x 12” x 16 w/fences
Hydraulic Accessory Kit for hydraulic Pipe Bender or Shop Presses
Pipe Notchers

Many other options available!

[ezcol_1half]

Ironworker Accessories[/ezcol_1half] [ezcol_1half_end][/ezcol_1half_end]

Edwards manufactures a full line of high quality, low maintenance hydraulic ironworking machines, associated tooling, and accessories that are used in the steel fabrication industry. Our Ironworkers are proudly MADE IN AMERICA with the highest quality American parts and accessories. Edwards Ironworkers Punch, Shear, Notch and Brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe. Metalfab, Inc. is a stocking dealer and offers discounted prices on all Edwards machines.