50 Ton Ironworker

Specifications:

PUNCHING                                        US
Rated capacity                                 50 Ton
Throat                                                 7″
Standard assy. maximum cap.   1″ diameter – 5/8″ plate
Work Height                                     37-5/8″
FLAT BAR SHEARING
Max. width                            1/2″ x 10″
Max. thickness                     3/4″ x 4″
Max. round capacity          3/4″
Max. square capacity         3/4″
Work height                         35 1/2″
ANGLE SHEARING
Maximum Size                      4″ x 4″ x 1/4″ or 3″ x 3″ x 3/8″
Work height                           40″
OPTIONAL COPING / NOTCHING
Max. capacity                      2″ x 3″ x 5/16″
Work height                        43-1/8″
GENERAL SPECIFICATIONS
Rated capacity                         50 ton
Throat depth                            7″
Open height                              8 1/8″
Shut height                               7″
Stroke                                         1-1/8″
Cycle time                                 2 seconds
Electric motor std.        3 HP, 3 phase, 208/240 volt, 1725 rpm, 7.4-7.8 amp
Electric motor opt.        3 HP, 3 phase, 440/480 volt, or 575 volt, 3.7 amp
3 HP, 1 phase, 208/240 volt, 1725 rpm, 14 amp
Hydraulic pump size        11 gpm – 2 stage
Valve Pressure                    2,200 psi
Reservoir                              6 gallons
Cylinder Ram                      4″
Dimensions
Base                                        28 1/4″ x 38-1/2″
Height                                    54″
Shipping Weight                1,550 pounds

Optional Equipment:
Coper/ Notcher
Punch & Die Starter Box, 8 sets (3/16” to 1 1/16”)
Quick Change Punch Coupling
10” Brake w/ 4 way die
8” Brake w/ 4 way die
Back Gauge for shearing plate and angle, up to 48”
Gauging Table Kit, 3/8” x 12” x 18” w/ fences
Heavy Duty Gauging Table Kit, 1” x 12” x 16 w/fences
Hydraulic Accessory Kit for hydraulic Pipe Bender or Shop Presses
Pipe Notchers

Many other options available!

[ezcol_1half]

Ironworker Accessories[/ezcol_1half] [ezcol_1half_end][/ezcol_1half_end]

Edwards manufactures a full line of high quality, low maintenance hydraulic ironworking machines, associated tooling, and accessories that are used in the steel fabrication industry. Our Ironworkers are proudly MADE IN AMERICA with the highest quality American parts and accessories. Edwards Ironworkers Punch, Shear, Notch and Brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe. Metalfab, Inc. is a stocking dealer and offers discounted prices on all Edwards machines.