60 Ton Ironworker

Specifications:
PUNCHING
Rated capacity                                60 Ton
Throat                                                7-1/2″
Standard assy. maximum cap.   1″ diameter – 3/4″ plate
Work Height        37-1/2″
FLAT BAR SHEARING
Max. width                                5/8″ x 12″ or 1/2″ x 14″
Max. thickness                        3/4″ x 8″
Max. round capacity                1″
Max. square capacity              1″
Work height                               35″
ANGLE SHEARING
Maximum Size                        4″ x 4″ x 3/8″ or 3″ x 3″ x 1/2″
Work height                           40″
COPING / NOTCHING
Max. capacity                        2-1/2″ x 5″ x 1/4″
Work height                          40-3/8″
GENERAL SPECIFICATIONS
Rated capacity                        60 ton
Throat depth                            7-1/2″
Open height                             8″
Shut height                              6-3/4″
Stroke                                      1-1/4″
Cycle time                               2 seconds
Electric motor std.              5 HP, 3 phase, 208/240 volt, 1725 rpm, 14 amp
Electric motor opt.              5 HP, 3 phase, 440/480 volt, or 575 volt, 7 amp
5 HP, 1 phase, 208/240 volt, 1725 rpm, 26 amp
Hydraulic pump size             3-1/2 gpm – 1 stage
Valve Pressure                         3,000 psi
Reservoir                                    7 gallons
Cylinder Ram                           2-1/2″
Dimensions
Base                                            36″ x 42-1/2″
Height                                        57″
Shipping Weight                    2,475 pounds

Optional Equipment:
Coper/ Notcher
Punch & Die Starter Box, 8 sets (3/16” to 1 1/16”)
Quick Change Punch Coupling
10” Brake w/ 4 way die
8” Brake w/ 4 way die
Back Gauge for shearing plate and angle, up to 48”
Gauging Table Kit, 3/8” x 12” x 18” w/ fences
Heavy Duty Gauging Table Kit, 1” x 12” x 16 w/fences
Hydraulic Accessory Kit for hydraulic Pipe Bender or Shop Presses
Pipe Notchers

Many other options available!

[ezcol_1half]

Ironworker Accessories[/ezcol_1half] [ezcol_1half_end][/ezcol_1half_end]

Edwards manufactures a full line of high quality, low maintenance hydraulic ironworking machines, associated tooling, and accessories that are used in the steel fabrication industry. Our Ironworkers are proudly MADE IN AMERICA with the highest quality American parts and accessories. Edwards Ironworkers Punch, Shear, Notch and Brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe. Metalfab, Inc. is a stocking dealer and offers discounted prices on all Edwards machines.