55 Ton Ironworker

EdwardsLogo4c_1_

Edwards-55ton_front                                      This is our best-selling model and is usually in stock. FOB: Indianapolis, IN

55 Ton Ironworker

Specifications:

Rated Capacity        55 ton
Throat Depth            7″
Open Height             8″
Shut Height             6-3/4″
Stroke                      1-1/4″
Cycle Time              2 seconds
Electric Motor Standard        5 HP, 3 Phase, 208/240 v,
1725 rpm, 14 amp
Electric Motor Options        •        5 HP, 3 Phase, 440/480 v or
•        575 v, 7 amp, 5 HP, 1 Phase, 208/240 v, 1725 rpm, 26 amp
Hydraulic Pump Size        3-1/2 gpm – 1 stage
Valve Pressure        2600 psi
Reservoir                 7 gallons
Cylinder                  2-1/2″ ram
Dimensions:      Base        36″ x 42-1/2″
Height                           59″
Shipping weight        2350 pounds

PUNCH
Max. Capacity        1 1/16”dia. in 5/8″ plate
Work Height           37-1/2″

FLAT BAR SHEAR
Max. Width           1/2″ x 12″ or 3/8″ x 14″
Max. Thick.           3/4″ x 4″
Max. Round          7/8″
Max. Square         7/8″
Work Height         34-3/4″

ANGLE SHEAR 
Max. Size             4″ x 4″ x 1/4″ or 3″ x 3″ x 3/8″
Work Height        34 3/4″

OPEN STATION SPECIFICATIONS
Throat Depth        7”
Open Height        8”
Shut Height         6 ¾”
Stroke                  1 ¼”

Optional Equipment:
Coper/ Notcher
Punch & Die Starter Box, 8 sets (3/16” to 1 1/16”)
Quick Change Punch Coupling
10” Brake w/ 4 way die
8” Brake w/ 4 way die
Back Gauge for shearing plate and angle, up to 48”
Gauging Table Kit, 3/8” x 12” x 18” w/ fences
Heavy Duty Gauging Table Kit, 1” x 12” x 16 w/fences
Hydraulic Accessory Kit for hydraulic Pipe Bender or Shop Presses
Pipe Notchers

Many other options available!

[ezcol_1half]notcherlarge_1_

Ironworker Accessories[/ezcol_1half] [ezcol_1half_end]Edwards-40-ton-shop-press-184x254[/ezcol_1half_end]

Edwards manufactures a full line of high quality, low maintenance hydraulic ironworking machines, associated tooling, and accessories that are used in the steel fabrication industry. Our Ironworkers are proudly MADE IN AMERICA with the highest quality American parts and accessories. Edwards Ironworkers Punch, Shear, Notch and Brake mild steel plate, bar-stock and angle. A wide range of accessories are available to fabricate rod, square stock, sheet metal and pipe. Metalfab, Inc. is a stocking dealer and offers discounted prices on all Edwards machines.

 

Please contact us for a free on-site consultation.
Metalfab, Inc. provides our customers with solutions to their manufacturing needs. We look forward to examining each metalworking application and developing the most efficient, cost effective method for production. Weather the solution is new or used machinery, application software, lean manufacturing, tooling or service, Metalfab will work for you to determine the best method.